295 x 595mm 18W LED Flat Panel Lights CE And RoHS Listed For Factory Lighting

 
295 x 595mm 18W LED Flat Panel Lights  CE And RoHS Listed For Factory Lighting
 
Quick Detail:

• PF>0.9 
• Imported diffuser plate
• Embedded or suspending mounting
• CE RoHS listed
• Energy saving around 70%
• 3 years warranty

 Features:

• Energy Saving. Saving 55%-70% electricity cost to traditional Panels.
• Advanced super longlife and stable driver.
• Professional thermal management.
• Instant on, no warm up time required.
• No noise, no flickering.
• No UV or IR radiation in the beam, mercury free.
• Anti-shock, anti-moisture.
• Aluminum alloy body and leading light transmitting Optical PMMA cover.
• Exquisite small appearance. Easy to install with mounting brackets.
• Eco-friendly. No mercury and harmful materials

 
 Specifications:
 

 
Attention on Installation:

1. Panel lights should be installed by trained electronic technician. 
2. Please check all the accessories when open the cartons.
3. The distance between the light and any flammable materials must be more than 0.2m.The 
4. distance between the upper part of the installed light and the ceiling must not be less than 2cm. Don not install into ceilings or walls that contain heat source. The main cable must not connect with the low voltage cable or the surface-mounted lights. 
5. Guide the lights' connecting cables through the drilled hole, and fix the surface mounted lights with the pre-fitted clips. Make sure that these are securely connected to the base material. 
6. When laying the cables, make sure that the cables and plugs are not subjected to any tensile or twisting forces. Do not kink cables. Output cables should be laid separately and at a distance from other cables. 
7. After installation, connect the transformer to the mains supply
8. Proceed by connecting the wiring cables to the lights. Usually, the brown (or black) wire is the Live wire, connect it with the terminal marked "L". The blue wire is Naughty wire; connect it with the terminal marked "N".
9. Use the dedicated LED drivers only, do not connect to other loads
10. Do not remove the label of the lights and drivers. 

Applications:

• Office Lighting, Factory Lighting
• Home Lighting, Residential Lighting
• Commercial Lighting, Project Lighting
• School Lighting, Hospital Lighting
• Publicity Lighting, Supermarket Lighting